GNSS Speedometer GPS GLONASS Receiver 10Hz Refresh Rate with Altitude and Speed Tracking, Built-in 1M Flash, 200 mAh Rechargeable Battery, Metric and Imperial Switch, Black
GNSS Speedometer GPS GLONASS Receiver 10Hz Refresh Rate with Altitude and Speed Tracking, Built-in 1M Flash, 200 mAh Rechargeable Battery, Metric and Imperial Switch, Black
GNSS Speedometer with GPS and GLONASS, 10Hz Refresh Rate and Built-in Data Logger
This GNSS speedometer is a compact tracking device for recording maximum speed, average speed, and high altitude. It receives GPS and GLONASS signals at the same time, which supports more consistent positioning than a single-constellation receiver. The refresh rate reaches up to 10Hz, so speed and position updates are frequent enough for detailed tracking. It records a UTC timestamp for each tracking point and stores data in the built-in 1M flash memory, giving up to 2 hours of recording time. The built-in 200 mAh LiPo rechargeable battery provides up to 150 minutes of working time. You can switch between metric and imperial systems, and the GNSS LOGGER software handles device management and data recording on Bing Maps. The firmware can be upgraded when new versions are available. The device measures 65.7 x 39.6 x 20.8mm and comes in black.
Features and Construction
The core hardware centres on simultaneous GPS and GLONASS reception, a built-in antenna, and a receiver operating on L1 at 1575.42 MHz. Satellite signal receiving sensitivity is -167dBm. The 10Hz refresh rate and built-in flash memory make the device suitable for detailed speed and altitude tracking without relying on a phone or external logger.
Material and Build
The GNSS speedometer has a built-in antenna and a receiver operating on L1 at 1575.42 MHz. It receives GPS and GLONASS at the same time, and satellite signal receiving sensitivity is -167dBm. The built-in 1M flash memory stores tracking data with a UTC timestamp for each point, giving up to 2 hours of recording time. The built-in 200 mAh LiPo rechargeable battery provides up to 150 minutes of working time. The unit is black and measures 65.7 x 39.6 x 20.8mm.
Size and Practical Fit
At 65.7 x 39.6 x 20.8mm, the device is small enough to carry or mount without taking up much space. The built-in antenna removes the need for an external aerial. It operates between 0°C and 40°C with 5% to 90% operating humidity, and can be stored between -10°C and 70°C. These limits are worth noting if you plan to use it in very cold or very hot conditions.
Uses and Placement
This device is aimed at speed and altitude tracking where a timestamped record is useful. It can be used for vehicle movement, outdoor activities, or any situation where you want to log maximum speed, average speed, and high altitude. The metric and imperial switching makes it easier to read in your preferred units.
Event or Professional Use
For event timing or field recording, the 10Hz refresh rate and UTC timestamp per tracking point provide a detailed log of movement. The built-in 1M flash gives up to 2 hours of recording, which suits shorter sessions without immediate data transfer. The GNSS LOGGER software supports device management and data recording on Bing Maps, so you can review tracks after the session. Firmware upgrades are possible when available.
Everyday Home Use
For everyday tracking, the device records maximum speed, average speed, and high altitude without needing a complex setup. The built-in 200 mAh LiPo battery gives up to 150 minutes of working time, and the metric and imperial switch lets you view readings in familiar units. The black casing and compact 65.7 x 39.6 x 20.8mm size make it easy to keep with other equipment. Store it between -10°C and 70°C when not in use.
Benefits and Buying Value
The main practical benefit is combined speed, altitude, and position logging in a single compact unit. Simultaneous GPS and GLONASS reception, a 10Hz refresh rate, built-in flash memory, and a rechargeable battery reduce the need for separate devices. The software and firmware upgrade support add to the device's usable life.
Reuse and Low Maintenance
The built-in 200 mAh LiPo battery is rechargeable, so the device can be used again after charging. Working time is up to 150 minutes. The 1M flash memory stores up to 2 hours of recording, which can be managed through the GNSS LOGGER software. Firmware can be upgraded, which helps keep the device current. No additional maintenance requirements are stated in the source data.
Why Choose This Product
Choose this GNSS speedometer if you need a compact logger that receives GPS and GLONASS simultaneously, refreshes at up to 10Hz, and records maximum speed, average speed, and high altitude with UTC timestamps. It measures 65.7 x 39.6 x 20.8mm, comes in black, switches between metric and imperial, and works within stated temperature and humidity limits. The built-in 1M flash and 200 mAh LiPo battery support up to 2 hours recording and 150 minutes working time respectively.
